Acti D51 Manual do Utilizador Página 1

3” Indoor Dome Series Hardware Manual D51, D52, D54, D55 E51, E52, E53, E54, E56, E57, E58, E59 Ver. 2014/12/17

www.acti.com Hardware Manual 10 Mounting Solutions There are several mounting solutions that you can use to install the camera. Sele

www.acti.com Hardware Manual 11 Straight Wall Mount Suitable when mounting the camera on straight walls. PMAX-0316 PMAX-0101

www.acti.com Hardware Manual 12 Other Mounting Accessories Accessories PMAX-0104 (Extension Tube) NOTE:  For more informatio

www.acti.com Hardware Manual 13 Installing the Camera on a Surface This section describes the procedures in installing the camera di

www.acti.com Hardware Manual 14 Step 2: Attach the Mounting Plate NOTE: Before installation, consider the camera viewing angle and l

www.acti.com Hardware Manual 15 Step 3: Connect the Cable 1. If the cable will pass through the hole on the surface, route the netw

www.acti.com Hardware Manual 16 Step 4: Attach the Fixing Bracket This step is required only for D54, D55, E52, E53, E54, E56, E57

www.acti.com Hardware Manual 17 Step 5: Install the Camera 1. If the cable passes through a hole on the surface, push the extra len

www.acti.com Hardware Manual 18 Step 6: Connect to Network Connect the other end of the network cable to a Power-over-Ethernet (PoE)

www.acti.com Hardware Manual 19 Step 8: Adjust the Viewing Angle and Focus 1. Rotate the dome cover counter-clockwise and then pull

www.acti.com Hardware Manual 2 Table of Contents Precautions 4 Safety Instructions ...

www.acti.com Hardware Manual 20 Below is an installation example.

www.acti.com Hardware Manual 21 Other Adjustments and Accessories How to Adjust the Viewing Angle and Focus This section describes t

www.acti.com Hardware Manual 22 D54 / D55 / E52 / E53 / E54 / E56 / E57 / E59 Camera Parts Overview Adjustment Procedures 1. Loose

www.acti.com Hardware Manual 23 How to Replace the Dome Cover For more discrete surveillance needs, the bundled dome cover can be re

www.acti.com Hardware Manual 24 4. Remove the plastic covering the dome cover.

www.acti.com Hardware Manual 25 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera f

www.acti.com Hardware Manual 26 By double-clicking with the left mouse on the camera model, it is possible to automatically launch

www.acti.com Hardware Manual 27 Using the Default Camera IP Address If there is no DHCP server in the given network, the user may ha

www.acti.com Hardware Manual 28 Manually adjust the IP addresses of multiple cameras: If there are more than 1 camera to be used in

www.acti.com Hardware Manual 29 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are u

www.acti.com Hardware Manual 3 Accessing the Camera 25 Configure the IP Addresses ...

www.acti.com Hardware Manual 30 The following examples in this manual are based on Internet Explorer browser in order to cover all f

Copyright © 2014, ACTi Corporation All Rights Reserved 7F, No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu Dis

www.acti.com Hardware Manual 4 Precautions Read these instructions You should read all the safety and operating instructions before

www.acti.com Hardware Manual 5 Federal Communications Commission Statement This equipment has been tested and found to comply with t

www.acti.com Hardware Manual 6 Safety Instructions Don’t open the housing of the product Cleaning Disconnect this video product from

www.acti.com Hardware Manual 7 Introduction List of Models This hardware manual contains the following models: D51 1MP Indoor Dome

www.acti.com Hardware Manual 8 Package Contents Camera Mounting Screw Kit Drill Template Lens Focus Tuner (Not available in D51,

www.acti.com Hardware Manual 9 Physical Description D51 / D52 / E51 D54 / D55 / E52 / E53 / E54 / E56 / E57 / E58 / E59 1)