ACTi E33 Manual descarregar pdf (Página 20)

www.acti.com

Hardware Manual

Step 1: Remove the Pre-installed Network Cable (“Pigtail”)

1. Loosen the three (3) screws to detach the back cover.

NOTE: A cable is connected inside the camera; do not abruptly pull the back

cover.

2. Disconnect the network connector (A) and remove the sealing nut (B).

3. Pull out the network cable from the back cover and disassemble the parts as

marked below.

4. Squeeze the seal to pull out the connector and then completely remove the seal,

claw, and sealing nut from the network cable.

Sealing Nut

Claw

Seal

(A)

(B)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Sem comentários

ACTi E33 Manual Página 20