ACTi TCM-7411 Manual do Utilizador descarregar pdf (Página 11)

www.acti.com

TCM-7411 Hardware User’s Manual

4) Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button (with a sharp tipped object, like a pen.)

Step 3: Reconnect the power cable while continuing to hold the reset button. The red Power

LED light will flash on for 3 second first, turn off for about 15 seconds, flash on for another second

and turn off again. By this time the reset to default operation is already completed. This will take

around 20 seconds from power up. You may then release the reset button. This length of time

fluctuates slightly with the environment. The Power LED light will come back on and stay on after a

few more seconds. The unit will start up with factory default settings automatically.

On (3s)

Power On

About 20 Seconds

Stay On

Off (about 15s)

Off (10~15s)

Restore to Default

Complete

5) Conduit Hole

Conduit Holes are openings where

cables pass through. There are two

conduit holes on this device, used

for different mounting angles.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Sem comentários

ACTi TCM-7411 Manual do Utilizador Página 11